Page 1 of 1

ACC and adjusting to speed limits

Posted: Wed Sep 21, 2022 4:56 pm
by Liamy321
Hi Everyone,

I have noticed that in my Born, when using ACC, it does not adapt to speed limits like the GF's ID3. I have looked through all of the settings and can't find anything matching the description. Has anyone else seen this or have it enabled? If so, what am I missing?

Thanks

Re: ACC and adjusting to speed limits

Posted: Wed Sep 21, 2022 5:12 pm
by Nacaduct
There’s a setting for that, but forgot where exactly it is… Look around, and you’ll find it:)

Re: ACC and adjusting to speed limits

Posted: Wed Sep 21, 2022 7:33 pm
by Born_in_MCR
Hi,
The manual indicates that menu is here:
The speed warning can be set or deactivated completely in the menu > Assistants >
Driver alerts > Road sign detection


Good luck...

Re: ACC and adjusting to speed limits

Posted: Sun Sep 25, 2022 9:34 pm
by Liamy321
Thanks both.

I managed to find it in the end! In the vehicle settings menu (tapping the car icon), under assistants, ACC. The option for "adjust to speed limit" is there and in my case was turned off. It's on now and makes long drives so much easier.

Re: ACC and adjusting to speed limits

Posted: Tue Sep 27, 2022 7:27 pm
by Ianb3101
I had an ID3 before and it adjusted the speed for bends and speed zones etc., basically you just steered the car. Is this the same as that function? I have it turned on in the settings but I tried the ACC and it didn't work, do you have to change it to Speed Limit with the mode button?