My Born small improvement’s

All CUPRA Born related discussions
User avatar
SilverCupra
Posts: 63
Joined: Fri Jun 17, 2022 9:11 am

Post by SilverCupra » Sun Oct 09, 2022 6:56 pm

After getting caught with a puncture, I really want a spare wheel..

Really interested in the boot floor mod so the space saver can be stored under it.

I have fitted the the boot floor kit in the standard way, and would be really interested to know how the side rails are modified to raise the floor enough to store the wheel.

Have you any installation pics or notes ?

Nice job..
Cupra Born V2 | Tech-L | Geysor Silver

Betty b
Posts: 248
Joined: Sat May 21, 2022 12:46 am

Post by Betty b » Sun Oct 09, 2022 8:06 pm

It’s just a case of lifting the side rails and re drilling the 2 holes lower, also I had to cut off one of the rear upper pegs and cut the rear where it fits over the lashing point.
I’ll try take some pictures of each side then you can see.
Cupra Born V2 | Tech-L | Vapour Grey

User avatar
Rerb
Posts: 30
Joined: Tue Oct 04, 2022 8:12 am

Post by Rerb » Wed Oct 12, 2022 11:16 am

Not sure if I'd want to carry space saver, but how handy is it to have this adjustable boot floor.
It looks good, but what would I gain fitting one as it doesn't seem like that much of a gap to store extra gear.
Could someone post any applicable photos of how this is used to it's full potential?

Thanks Rerb

Stu
Posts: 8
Joined: Sat Sep 10, 2022 9:26 am

Post by Stu » Wed Oct 12, 2022 5:56 pm

It’s a great place to store your cable and granny charger with the added bonus of levelling the boot floor to match the rear seats folded forward.
Stu….

V2 - Vapour Grey

User avatar
Rerb
Posts: 30
Joined: Tue Oct 04, 2022 8:12 am

Post by Rerb » Wed Oct 12, 2022 10:37 pm

Ah , so it's perfectly flat when seats are down for easy loading.

Stu
Posts: 8
Joined: Sat Sep 10, 2022 9:26 am

Post by Stu » Thu Oct 13, 2022 6:20 am

Yes.

I added the kit myself as mentioned here but without the modifications.
Stu….

V2 - Vapour Grey

User avatar
Rerb
Posts: 30
Joined: Tue Oct 04, 2022 8:12 am

Post by Rerb » Thu Oct 13, 2022 12:34 pm

Hmm
Do you think I could also fit bottom boot load liner after this is installed as sometimes I carry heavy boxes in boot when I'm out & about & don't want to risk damaging the boot floor mod.
I do agree though it looks the part when fitted!

Stu
Posts: 8
Joined: Sat Sep 10, 2022 9:26 am

Post by Stu » Thu Oct 13, 2022 12:40 pm

There are two versions of the OEM liner. One for the standard floor and one for the raised floor. I have the one for the raised floor and it may possibly fit underneath if you remove the boot floor. I don’t know if the standard floor one would fit underneath as I don’t have it.
Stu….

V2 - Vapour Grey

User avatar
Rerb
Posts: 30
Joined: Tue Oct 04, 2022 8:12 am

Post by Rerb » Thu Oct 13, 2022 2:01 pm

That may be the better item anyway & a money saver!

JGriff
Posts: 15
Joined: Fri Sep 02, 2022 4:28 pm

Post by JGriff » Thu Nov 17, 2022 3:11 pm

Activating rear speakers
screen shot of vehicle with Beats Audio

control unit 8125 infotainment
Adaptions
Function_configuration_audio
Signal_flow_topology

Screenshot_20221117_144206_OBDeleven.jpg


Post Reply

  • You may also be interested in...
    Replies
    Views
    Last post