No the coding problem has nothing to do with the tweeters, it’s the topology setting that’s giving me the error but for me speakers are working.
We need a scan of a born with beats fitted to get to the bottom of this.
My Born small improvement’s
Thanks for the continued replies, I have no idea what that means in reality. Does it affect anything?
I have OBD11 on order, and I'm in Leeds if there's anyone round about out there who has the beats install for us to get a scan?
I have OBD11 on order, and I'm in Leeds if there's anyone round about out there who has the beats install for us to get a scan?
Cupra Born V2 | Tech-M | Aurora Blue
It can still be coded using above coding but it brings a fault of missing data if you scan, speakers will all work.
For now until we can get correct coding it’s the only option, but I’m sure we’ll crack it soon
For now until we can get correct coding it’s the only option, but I’m sure we’ll crack it soon
Cupra Born V2 | Tech-L | Vapour Grey
-
- Posts: 9
- Joined: Fri Aug 26, 2022 11:11 pm
Hi
i've tested some values for topology settings last week (and maybe some days more). I searched for other vw cars values, but did'nt find a lot of them. So i tested them and some other values i thought they could be possible. Values are from 0 to 50 increasing by 5 every time. I see (and hear) no difference between them, but after 5 or 6 tries my Balance/Fader isn't broken anymore. Now it works as it should even with value at 25! Betty W must have been lucky that it worked after just 1 try.
But Equalizer is still crap. Does it really have 5 controls with 5 different frequencies at all your cars? I can't believe that my car should be the only one with that error.
Now i can set the Fader at the level i needed (not to hear the rear tweeter to much) but bass is always a bit low. But i think, i will fit a subwoofer to the lower compartment at the trunk.
i've tested some values for topology settings last week (and maybe some days more). I searched for other vw cars values, but did'nt find a lot of them. So i tested them and some other values i thought they could be possible. Values are from 0 to 50 increasing by 5 every time. I see (and hear) no difference between them, but after 5 or 6 tries my Balance/Fader isn't broken anymore. Now it works as it should even with value at 25! Betty W must have been lucky that it worked after just 1 try.
But Equalizer is still crap. Does it really have 5 controls with 5 different frequencies at all your cars? I can't believe that my car should be the only one with that error.
Now i can set the Fader at the level i needed (not to hear the rear tweeter to much) but bass is always a bit low. But i think, i will fit a subwoofer to the lower compartment at the trunk.
-
- Posts: 9
- Joined: Fri Aug 26, 2022 11:11 pm
Yes i have an error and i think its the same you have ("Datensatz unplausibel" means some data is corrupt). but unfortunately noone i asked had this failure until i found this thread. All other confirmed me that they have no error after coding.
-
- Posts: 9
- Joined: Fri Aug 26, 2022 11:11 pm
Same here .
There are more id.3 drivers with working speaker update without error but also at least 2 born driver without problem.
I asked at a skoda enyaq forum for a backup of 8125 from someone with rear speakers equipt and at german born forum for a backup from someone with beats, but didnt get an answer. Maybe that would help.