Thanks for your reply, I’ll go give it a go

Today I’ve noticed the Cupra is only charging at 1.89 kWh instead of around 7 kWh on our home charger, I assumed it was our Zaptec charger but plugging our other car in it jumps to the normal charging rate.
So now battery is down at 20% and it’s saying over a day to charge

Yes had this a few times, think it’s just another glitch.

Sorry I thought I read you had the side sensors, I’ve added them to my last Audi and coded in bit it’s a big job.

When you park and get close to objects do the side sensors work, other than that it’s just coding as all borns have the motor steering rack.

It’s just a case of lifting the side rails and re drilling the 2 holes lower, also I had to cut off one of the rear upper pegs and cut the rear where it fits over the lashing point.
I’ll try take some pictures of each side then you can see.

It’s just clear, I was thinking this would be a problem too before I started, folded the seats down got in the back and got the wife to close the boot a few times, I think my neighbour’s think I’m mad

To be fair, most of the load is on the spare wheel, the side supports are bolted into the factory mounts, it all feels very sturdy, I think I’ve only lifted it about 3cm after removing the original boot carpet.

I’ve just managed to fit the adjustable boot floor, I wanted to hide the space saver wheel but had to modify it to fit. E152ACC0-049F-4F5D-AD6E-96CA4CEED836.jpeg I’ve had to modify the left/right supports as they needed to be lifted slightly, still managed to use the factory captive nuts so it’s ver...

First impression, camera’s front/rear have good image quality but need to do night driving to be sure. Lovely job on the rear camera install. Did you route straight down the centre of the car over the headlining? If so any issues or did you manage to rod it through easily enough?? You removed the b...